Installation & Care

Clean surface: Remove dust, oil, and residues with isopropyl alcohol or a mild cleaner and let dry fully.

Align carefully: Use a level or guide marks to ensure the plate is straight before fixing.

Secure fit: Tighten screws evenly and use appropriate washers; avoid overtightening which can crack plates or brackets.

Apply stickers: Start at one edge and smooth slowly with a soft card to remove air bubbles; allow adhesive to set.

Avoid pressure washing: Do not direct high-pressure water at plates or stickers for at least 48 hours after installation.

These are general guidelines. Follow any specific product instructions supplied with your order or provided by the manufacturer.